Kohler’s new Persuade Ensemble will turns heads in your home with its combination of sleek curves and clean design. The WaterSense labeled Dual Flush toilet saves thousands of gallons of water annually, and the sink coordinates with your choice of the Persuade full vanity, petite vanity or console table. The Petite vanity can be confusing. It’s the same dimensions as the full vanity but with shorter doors that will hide the plumbing. This allows for a shelf on the bottom for more open storage.
Kohler may add whirlpools, pedestals, baths, one-piece toilets and bidets to the Persuade Ensemble in the future. The following are currently available from Kohler with more to come:
The Persuade 24″ Vanity
Shown as K-2529 24″ Vanity with the K-2956-8 Integrated lavatory with 8″ widespreadA faucet with hot and cold handles separate from the spout, usually in an 8" setting, measured from left handle to right handle. drilling.
Also available are the K-2956-1 Integrated lavatory with single-holeOne hole drilling positioned in the center of a lavatory faucet ledge that provides for installation of a single-control faucet. drilling, and the K-2956-4 Integrated lavatory with 4″ centerset drilling.
Persuade Petite Vanity
K-2527 Petite vanity that coordinates with the K-2956-8 Integrated lavatory with 8″ widespread drilling, K-2956-1 Integrated lavatory with single-hole drilling, and the K-2956-4 Integrated lavatory with 4″ centerset drilling.
Persuade Console Table
K-2526 Console table also coordinates with the K-2956-8 Integrated lavatory with 8″ widespread drilling, K-2956-1 Integrated lavatory with single-hole drilling, and the K-2956-4 Integrated lavatory with 4″ centerset drilling.
Persuade Curv Toilet
K-3723 Comfort HeightThe height of a toilet bowlA water-containing receptor that receives liquid and solid body waste; two general bowl classifications are round-front and elongated. (with seat) that stands at the same height as a standard chair for maximum comfort and ease when sitting down or standing up. two-piece toiletA toilet with a separate tankThe fixture reservoir for flushing water. On a conventional toilet, the ballcockThe mechanism that controls the flow of water into a gravity-operated toilet tank. The ballcock is controlled by the float mechanism floating in the water in the tank. When the toilet is flushed, the float drops and opens the ballcock, allowing water to enter the tank and/or bowl. The float rises as the water level in the tank is restored, and shuts off the ballcock when the tank is completely filled. Also referred to as a float valve., flush valve and trip lever are installed in the tank. A tank lid closes the top tank opening. and bowl. Also referred to as "close-coupledA term for a toilet with a separate tank and bowl, secured to each other, and with a separate tank cover. Also referred to as a two-piece toilet."..
Kohler may add whirlpools, pedestals, baths, one-piece toilets and bidets to the Persuade Ensemble in the future. The following are currently available from Kohler with more to come:
